The HS1B uncapping machine has been designed to suit the hobby or amateur to small commercial operation.

Body and other parts are laser cut 2mm stainless steel. Chains, sprockets and shafts are stainless steel.

MAGAZINE CAPACITY:  4 combs
UNCAPPING RATE:  4 combs per minute
BLADES:  Adjustable cutting depth. Suitable for steam or hot water.
MOTOR:  0.37KW single phase 240 volt
DIMENSIONS:  900mm wide x 300mm long x 500mm high
WEIGHT:  30KGS

The S1B uncapping machine will suit the small to medium commercial operations.

• Stainless steel construction including chains and sprockets.
• Idler sprocket bushes and blade shaft bushes are acetal plastic.
• Main body is laser cut 3mm stainless steel.
• Blades have machined serrations and fully welded heating jackets.
• Switchgear incorporating forward/reverse push buttons, emergency stop and overload reset buttons.

MAGAZINE CAPACITY:  4 combs
UNCAPPING RATE:  8 combs per minute
SAFETY CLUTCH:  Integral with gear box – adjustable
MOTOR:  0.55KW single phase 240 volt single phase
DIMENSIONS:  890mm wide x 460mm long x 570mm high
WEIGHT:  55KGS

The S2B uncapping machine was designed to suit 3 bank horizontal honey extractors for small commercial operations. The 180mm elevation built into the machine allows for a more comfortable working height.

• Stainless steel construction including chains and sprockets.
• Main body is laser cut 3mm stainless steel.
• Blades have machined serrations and fully welded heating jackets.
• Switchgear incorporating forward/reverse push buttons, emergency stop and overload reset buttons.

MAGAZINE CAPACITY:  4 combs
UNCAPPING RATE:  8 combs per minute
SAFETY CLUTCH:  Integral with gear box – adjustable
MOTOR:  0.55KW single phase 240 volt single phase
DIMENSIONS:  890mm wide x 840mm long x 570mm high
WEIGHT:  67KGS
COMB EXIT HEIGHT:  180mm above base

This uncapping machine has been designed to suit the 3 bank horizontal extractor for larger commercial operations. A deboxer can be fitted if required.

• Stainless steel construction including chains and sprockets.
• Main body and magazine are laser cut 3mm stainless steel.
• Blades have machined serrations and fully welded jackets suitable for steam or hot water.
• Idler sprockets bushes and blade shaft bushes are acetal plastic.
• 200mm elevated comb exit making it suitable for horizontal extractors.

MAGAZINE CAPACITY:  4 combs
UNCAPPING RATE:  11 combs per minute
BLADES:  machined serrations and fully welded heating jacket for hot water or steam.
MOTOR:  0.55KW single phase 240 volt single phase
DIMENSIONS:  890mm wide x 1190mm long x 690mm high
WEIGHT:  95KGS

The S4B uncapping machine suits the commercial operation with hand loaded extractors. A Deboxer can be fitted if required.

• Stainless steel construction including chains and sprockets.
• Main body and magazine – laser cut 3mm stainless steel.
• Blades – machined serrations and fully welded jackets suitable for steam or hot water.
• Idler sprockets bushes and blade shaft bushes are acetal plastic.

MAGAZINE CAPACITY:  12 combs
UNCAPPING RATE:  10 combs per minute
BLADES:  Integral with gear box – adjustable.
MOTOR:  0.55KW single phase 220-250 volt
DIMENSIONS:  900mm wide x 790mm long x 670mm high
WEIGHT:  77 KGS

The deboxer is designed to be attached to either the S3B or S4B chain feed uncapping machines.

CONSTRUCTION: Stainless Steel
BOX SIZES: Supplied for either 8 or 10 frame boxes. Suitable from half depth to full depth boxes.
OPERATION: By 2 hand lever valves
AIR SUPPLY: Compressed air 600 – 750 kpa (85-110psi)
35 LITRE PLASTIC TUB: For top and bottom bar scrapings, fitted to box rails
WEIGHT:  77 KGS